Mobile X-Ray Shield with Articulating Arm

This mobile shield puts a clear lead-acrylic panel on a rolling stand, so you can park it right where the scatter is and roll it clear when you don't need it. The 920 mm swing arm extends the panel out from the post, and a set of lead-rubber curtains hangs below the acrylic to close off the gap at the bottom — no scatter slipping through under the shield.

The 600 × 400 mm panel is Japanese imported lead acrylic at 0.5 mm Pb, clean and defect-free. Below it, four 250 × 165 mm lead-rubber flaps (600 × 250 mm total) cover the lower opening. The post stands 1500 mm tall — 1660 mm from the floor — and the base rides on locking casters, so one person can move it and lock it down.

In the Room

Roll the stand to the work area, lock the casters, then swing the arm out to position the clear panel between the source and the operator. The acrylic keeps the patient and monitors in view, and the lead-rubber flaps below catch the scatter that would otherwise pass under the panel. When the case wraps up, swing the arm in, release the casters, and roll it to storage — no mounting, no installation.

The locking casters hold position during the procedure and roll easy when it's time to move. The whole unit is light enough for one person to handle solo.

Need a different panel size, arm length, or lead equivalence? We manufacture to spec. Send us your room dimensions and shielding requirements, and we'll match the build.