Image not available
Industrial manufacturing
Multi-purpose Pig Abattoir Platform
<p>This Multi‑purpose Pig Abattoir Platform is specified for one practical job: a stable receiving or working surface for a manual operation, inspection step or short transfer. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
This Multi‑purpose Pig Abattoir Platform is specified for one practical job: a stable receiving or working surface for a manual operation, inspection step or short transfer. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The frame supports a table, roller bed, grate or adjustable platform at the required height. Product is received, held or moved onward by an operator, gravity or a small drive, depending on the configuration. The upstream machine must not feed faster than the receiving station can clear.
Main Features
Working height suited to the task
Drainable, easy‑clean surfaces
Safe access and handrails where needed
Alignment with the rail or conveyor
Adjustable feet or anchored installation
Space for tools and sterilizers
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P511‑I |
| Application | Carcass cleaning platform |
| Out size | 2000*1000*1500mm (L*W*H) |
| Component and material | 1） Hot galvanized steel or Stainless steel support column (diameter:∮159mm) 2） Hot galvanized steel or Stainless steel main frame (60*40*2mm) 3） Hot galvanized steel or Stainless steel ladder and handrail 4） Anti‑skid plastic square (25mm) |
| Quotation control | Send the floor plan, operator task, product load, rail height and cleaning method. Platforms also require step, handrail, toe‑board and local fall‑protection details. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is carcass receiving, trimming, evisceration, offal handling and other staffed positions in an abattoir. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 200 pigs per hour places the multi‑purpose pig abattoir platform between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
