Shelf back and layer panel production line

Basic production conditions of equipment
Equipment production conditions:
1 The equipment covers an area: 30×3×2 (length×width×height) meters.
2 Equipment feeding direction: left in and right out.
3 Voltage parameter 380, 50Hz, 3 phases.
4 Air source: the flow rate is 0.5m³/Min; the pressure is 0.7MPa.
5 Hydraulic oil: 46# hydraulic oil.
6 Gear oil: 18# hyperbolic gear oil.
Main technical parameters of the equipment
1 Rolled strip width: ≤775mm
2 Rolled strip thickness: 0.6mm/0.9mm
3 Rolled strip material: cold-rolled steel strip yield limit σs≤260Mpa
4 Roll material: Cr12, quenched HRC56°-60°
5 Molding speed: 0~12m/min, online speed 0-6 M/min
6 Rolled workpiece length: user free setting
7 Total installed capacity of equipment: about 30KW.

Processing:

drawings:

Basic specification