Gold Foil Marble Pattern Gift Paper Bag

- Thick white card, so the walls hold up even with nothing inside the bag

- Creases stay where they are set, so the face stays flat instead of buckling

- The four sides come out square, so the bag keeps its shape on a counter

It shelves and photographs standing up, which is what a gift bag has to do.

The face is printed with a marble pattern, one version in pink and one in blue-violet, both a wash of colour over white with the veins running in long streaks. Gold lines lie over the veins, like the mineral seams in real marble. The English on the front is foil stamped, so it flashes when the light turns and sits slightly raised under a finger; a line of small script sits underneath. The colours stay quiet, and the bag carries itself on a gift counter.

The handle is cotton rope, twisted rather than braided, so it feels soft in the hand and does not cut into the fingers. The top edge of the bag is folded over, so the punched holes go through two layers of card rather than one, and the rope passes through both; the ends are fixed inside, so a heavier load does not tear the holes out. A satin bow in the same colour is tied at the front of the handle as a separate piece — that bow is what makes the bag read as a gift bag.

The base is not just folded: it is cut in 3D, the creases are pressed first, and the bottom is glued by hand, so the seam runs straight and even. Opened out, the base sits flat and the four corners come up square, which is what holds the bag upright. Loaded, the base does not sag in the middle, and the bag stands on a shelf without leaning on anything.

- Small, 18 × 10 × 16cm — for favour boxes, lipstick and samples

- Medium, 25 × 12.5 × 20cm — for skincare sets and perfume

- Large, 31 × 12 × 25cm — for gift boxes, or several items at once

- Sizes outside these can be cut to order, with the pattern and the words printed to your brand

Birthdays, holidays, favours and cosmetics counters all use the same bag, in a different size.

We are a source factory, not a trading office: the printing, the lamination, the die-cutting, and the folding and gluing of our boxes are all done in our own workshops, and our paper bags are made the same way, so nobody in the middle is guessing at your order. On the box side, we make mailer, lid-and-base, drawer, magnetic flip-top, folding, and jewelry boxes, with liners and inserts fitted where they are needed; on the bag side, cotton-rope, ribbon-handle, flat-paper, die-cut handle, kraft, colored card, and specialty paper bags. We make boxes and bags for consumer electronics brands, power bank and earbud sellers, digital accessory makers, small home appliance brands, and sellers shipping through marketplaces and their own websites. Small batches and full container orders are both welcome; a few hundred pieces to start is no problem. You send us your logo or your idea, we make a sample first and shoot it in real light so you can approve it, then we run the order. One coordinator follows your order from the first drawing to the day it ships.