Kraft Paper Wedding Favor Box

The box is made of kraft paper with some body to it, so the four sides fold up square and it stands on a table on its own instead of sinking. The colour is the natural tone of the paper, which sits well under red or white stickers and under twine, and the creases fall on the edges, so the front panel stays clean. Candy, small trinkets and other light items go in without pulling the box out of shape.

- The base opens out and the four sides fold up, and the box stands

- The lid folds over and its two tabs push into the slots on the box, which is what holds it down

- A half-round thumb notch on the front is what opens it again

- Once folded, the sides are square and the lid sits flat, so the box does not come apart when it is lifted

Flat to closed takes a few seconds, which is what a favour table needs.

- A sticker: the seal runs from the lid down onto the front and holds in one press

- An elastic band: it slips over the box, and it goes back on after the box is opened

- Twine: the twine runs through the holes in the lid and is tied off in a knot

- Ribbon: a satin bow, for weddings and birthdays

- The methods can be mixed — twine with a small card, for instance

Tell us which ones you use, and the holes and the fittings are made for that.

The colour of the box can be chosen — white, natural kraft, bright red, deep red and black are all in the range — and the surface takes a logo, a pattern or holiday wording, in gold on red or white on kraft. The print follows your artwork, so one order runs one look across the whole batch.

Favour boxes are the commonest use: one box to a place at the table. Birthday gifts, holiday boxes, bakery and dessert favours, small jewellery and samples all use the same box, with only the colour and the print changed. For weddings, thank-you events and trade shows, the square shape means a row of them lines up straight.

We are a source factory, not a trading office: the printing, the lamination, the die-cutting, and the folding and gluing of our boxes are all done in our own workshops, and our paper bags are made the same way, so nobody in the middle is guessing at your order. On the box side, we make mailer, lid-and-base, drawer, magnetic flip-top, folding, and jewelry boxes, with liners and inserts fitted where they are needed; on the bag side, cotton-rope, ribbon-handle, flat-paper, die-cut handle, kraft, colored card, and specialty paper bags. We make boxes and bags for consumer electronics brands, power bank and earbud sellers, digital accessory makers, small home appliance brands, and sellers shipping through marketplaces and their own websites. Small batches and full container orders are both welcome; a few hundred pieces to start is no problem. You send us your logo or your idea, we make a sample first and shoot it in real light so you can approve it, then we run the order. One coordinator follows your order from the first drawing to the day it ships.