Image not available
Industrial manufacturing
Pig Head Scalding Machine
<p>This Pig Head Scalding Machine is specified for one practical job: a heated‑water system that conditions pig skin, heads or hooves before mechanical hair removal. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, m…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
This Pig Head Scalding Machine is specified for one practical job: a heated‑water system that conditions pig skin, heads or hooves before mechanical hair removal. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
Product is immersed, sprayed or conveyed through controlled hot water for a set time. Temperature and exposure loosen hair without unnecessary heat damage, after which the item moves directly to the dehairing step. The upstream machine must not feed faster than the receiving station can clear.
Main Features
Stable scalding temperature
Exposure time matched to the product
Insulated tank or enclosure options
Controlled overflow and drainage
Safe loading and discharge
Access for sediment removal
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P619 |
| Application | Which main used to scald pig head for dehairing |
| Out size | 3000*1200*1000 mm(L*W*H) |
| Working principle | steam heating way or electric |
| Water temperature | 58‑62 ℃ |
| Component and material | 1) Hot galvanized steel or Stainless steel 8# U‑steel main frame and tank body frame 2) Stainless steel plate (3mm) 3) Polyurethane insulation materials (70mm) 4) Hot galvanized steel or Stainless steel steam heating pipe 5) Drain valve 6) Thermometer |
| Quotation control | Confirm product size, batch or continuous duty, capacity, target temperature, heat source, water volume, make‑up rate, exhaust and effluent arrangements. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is pig carcass, head and hoof preparation lines ahead of dehairing or finishing. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 200 pigs per hour places the pig head scalding machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
