Image not available
Industrial manufacturing
Grid-Belt Pork Deboning Conveyor
<p>For line designers, the Grid‑Belt Pork Deboning Conveyor provides a downstream pork cutting or deboning station that organizes product while operators or blades make the required cuts. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced bel…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
For line designers, the Grid‑Belt Pork Deboning Conveyor provides a downstream pork cutting or deboning station that organizes product while operators or blades make the required cuts. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
Carcass sections or primals are supported and presented at a controlled working height. A saw, knife station or multi‑level conveyor separates cuts and routes meat, bone and trim to their designated outlets. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Main Features
Orderly separation of meat, bone and trim
Working height suited to operators
Food‑contact surfaces designed for cleaning
Belt or table width matched to product
Safe tool and blade positions
Interfaces to packing and crate handling
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P605‑I |
| Application | Which main used to convey pig carcass for boneless |
| Rated voltage/Phase/Frequency | 380V/3P/50HZ |
| Power | 0.75kw |
| Out size | 6000*720*800mm(L*W*H) |
| Component and material | 1） Stainless steel square tube frame (60*40*2mm and 38*25*2mm) 2） Polyoxymethylene module network belt 3） Stainless steel driving shafts and roller 4） Frequency control |
| Quotation control | Define the cutting pattern, pieces per hour, product temperature, belt width, operator count, waste routes, tool sterilization and pack‑out format. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is pork primal cutting, deboning, trimming and packing rooms. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 300 pigs per hour places the grid‑belt pork deboning conveyor between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
