Image not available
Industrial manufacturing
Flat-rail Pulley Hook
<p>For line designers, the Flat‑rail Pulley Hook provides a load‑bearing chain, shackle, hook or trolley component for overhead pig and carcass handling. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quot…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
For line designers, the Flat‑rail Pulley Hook provides a load‑bearing chain, shackle, hook or trolley component for overhead pig and carcass handling. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The carrier takes the animal or carcass load and travels along the specified rail or chain path. Wheels, pivots and contact points guide the load while allowing transfer, return and cleaning between cycles. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Main Features
Load rating matched to carcass weight
Geometry compatible with the rail
Wear parts that can be replaced
Smooth surfaces for cleaning
Controlled spacing on powered lines
Traceable spare‑part dimensions
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P506‑II |
| Application | Which main used to hang PIG carcass for slaughtering process |
| Weight | About 2.7kg |
| Out Size | 500*50*20mm (L*W*H) |
| Tube Diameter | 10‑15mm |
| Carrying Capacity | 1500Kg |
| Component and material | Stainless steel precision casting hanger and hooks (φ22mm) and refined casting Nylon slider |
| Quotation control | Provide rail profile, wheel diameter, axle dimensions, hook or shackle drawing, rated load and chain pitch. Small dimensional differences can prevent interchangeability. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is bleeding rails, dressing lines, chill rooms and empty‑carrier return systems. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 300 pigs per hour places the flat‑rail pulley hook between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
