Image not available
Industrial manufacturing
Horizontal Pig Carcass Splitting Saw
<p>For line designers, the Horizontal Pig Carcass Splitting Saw provides a carcass or primal cutting machine that makes a repeatable split or sectioning cut in the pork process. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for com…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
For line designers, the Horizontal Pig Carcass Splitting Saw provides a carcass or primal cutting machine that makes a repeatable split or sectioning cut in the pork process. Its value depends on the hand‑off before and after the machine, so the rail, floor level and controls should be reviewed together. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
A band, reciprocating blade or circular cutting element travels through the aligned carcass. The operator or automatic positioning system controls the cut path, after which the blade area is rinsed and sterilized according to the plant procedure. Cleaning access and safe isolation are part of the operating principle, not optional extras.
Main Features
Blade format selected for the cut
Rigid carcass or product positioning
Guarded cutting zone
Wash‑down‑oriented construction
Blade change and tension access
Sterilization compatible with the duty cycle
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | E‑P502‑I |
| Application | Which main used to cut pig carcass into half parts |
| Rated voltage/Phase/Frequency | 380V/3P/50HZ |
| Power | 5.5kw |
| Saw diameter | Ø750 mm |
| Capacity | 300 Pig/Hr |
| Out size | 4150*1150*2000mm(L*W*H) |
| Component and material | 1) Hot galvanized steel or Stainless steel main frame 2) Stainless steel groove 3) Stainless steel blade |
| Quotation control | Confirm cut type, product dimensions, hourly capacity, blade specification, motor supply, mounting, extraction or collection needs and whether the machine is manual or automatic. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is pig carcass splitting, primal sectioning and downstream pork cutting rooms. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 300 pigs per hour places the horizontal pig carcass splitting saw between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
