Image not available
Industrial manufacturing
Pig Carcass Singeing Furnace Machine
<p>In a pig plant, the Pig Carcass Singeing Furnace Machine serves as a carcass‑finishing station that removes remaining hair or surface residue after primary dehairing. The final build must match the actual product load, room layout and cleaning routine at site. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm volta…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
In a pig plant, the Pig Carcass Singeing Furnace Machine serves as a carcass‑finishing station that removes remaining hair or surface residue after primary dehairing. The final build must match the actual product load, room layout and cleaning routine at site. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The carcass passes rotating polishing elements, trimming positions or a controlled flame zone. Exposure is limited to the surface treatment needed before final washing and clean‑line entry. Operators need a clear stop‑and‑recovery routine for a jam, tool change or hygiene break.
Main Features
More uniform carcass finish
Adjustment for carcass size and line speed
Contained residue or exhaust
Guards around moving or hot parts
Easy access for cleaning
Integration with the overhead rail
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P403 |
| Application | Which main used to burn remnant hair on pig carcass skin |
| Work pressure | 0.3‑0.5 MPA |
| Liquefied gas Consumption | 0.3‑0.5 kg / Pig |
| Out size | 2300*1500*4300mm(L*W*H) |
| Max capacity | 300‑400 Heads per hour |
| Component and material | 1）3mm stainless steel plate 2） 4pcs gas / air mixed columns 3）28pcs flame nozzles 4）Stainless steel chimney 5）Stainless steel gas pipeline and various valves and sensors 6）Independent central control central 7）Protection against excessive gas pressure 8）Gas leakage protection |
| Quotation control | Specify line speed, carcass range, upstream dehairing result, required finish, exhaust or gas supply, fire controls and downstream washer position. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is pig slaughter lines between primary dehairing and final carcass washing. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 120 pigs per hour places the pig carcass singeing furnace machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
