Image not available
Industrial manufacturing
Pig Carcass Horizontal Skinning Machine
<p>The Pig Carcass Horizontal Skinning Machine is designed as a machine or conveyor section that supports hide opening or controlled removal of skin from pig carcasses. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, mate…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
The Pig Carcass Horizontal Skinning Machine is designed as a machine or conveyor section that supports hide opening or controlled removal of skin from pig carcasses. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The carcass is restrained while an operator or powered roller establishes the skin opening and pulls the skin away under controlled tension. The handling section maintains carcass orientation and keeps the removed skin clear of exposed meat. During commissioning, the sequence should be tested first without product and then under a representative load.
Main Features
Controlled tension to limit meat damage
Stable carcass restraint
Clear separation of skin and meat paths
Adjustment for carcass size
Guarded rollers or pull points
Wash‑down access
Technical Specifications
Pig Carcass Horizontal Skinning Machine
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P303 |
| Application | Which main used to remove pig skin complete from carcass with intact |
| Rated voltage / phase / frequency | 380v / 3p / 50hz |
| Power | 4+1.5kw |
| Feed amount | ±12mm |
| Roller diameter | Φ650mm |
| Out size | 3400*1150*1100mm(L*W*H) |
| Max capacity | 100 Heads per hour |
| Component and material | 1）Painted iron or stainless steel support frame 2）Cast iron roller 3）High strength steel vibration knife |
| Quotation control | Confirm whether the duty is skin opening or full skin removal, carcass range, throughput, rail height, pull direction, operator position and skin discharge route. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is pig plants using a skin‑off process or requiring a dedicated skin‑opening station. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case
A regional pork processor planning for 60 pigs per hour places the pig carcass horizontal skinning machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
