Image not available
Industrial manufacturing
Pig Carcass Dehairing Machine
<p>The Pig Carcass Dehairing Machine is designed as a mechanical hair‑removal machine for scalded pig carcasses, heads or hooves. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and docume…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
The Pig Carcass Dehairing Machine is designed as a mechanical hair‑removal machine for scalded pig carcasses, heads or hooves. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
Rotating drums, paddles, scrapers or beaters contact the scalded surface and lift loosened hair. Water flushes hair away while the machine controls dwell time and product movement toward discharge. During commissioning, the sequence should be tested first without product and then under a representative load.
Main Features
Duty matched to product size and throughput
Replaceable scraping or beating elements
Contained hair and water discharge
Openable guards for cleaning
Drive protection against overload
Straightforward wear‑part replacement
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P209‑I |
| Application | Which used to remove pig hair and used in small and middle capacity pig slaughterhouse |
| Rated voltage / phase / frequency | 380v / 3p / 50hz |
| Power | 7Kw |
| Out size | 2680*1340*1660mm(L*W*H) |
| Capacity | 150pig per hour |
| Dehairing time | 40s |
| Loading weight | ≤230Kg |
| Dehair effective length | 1.8m |
| Dehairing rate | ≥90 |
| Bone broken rate | ≤2% |
| Axis qty | 2sets |
| Quotation control | State scalding method, product weight range, heads per hour, batch size, available water, hair collection route, motor standard and the required discharge height. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is small batch plants through high‑capacity continuous pig slaughter lines. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 60 pigs per hour places the pig carcass dehairing machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
