Image not available
Industrial manufacturing
Meat Crate Lifting Machine
<p>The Meat Crate Lifting Machine is designed as a powered or manual handling section that keeps carcasses, hooks, offal or product moving between process stations. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, material…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
The Meat Crate Lifting Machine is designed as a powered or manual handling section that keeps carcasses, hooks, offal or product moving between process stations. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The load is supported by a belt, chain, rollers or an overhead carrier. A drive and tension arrangement advances it at a set or adjustable speed, while guides keep the load aligned through the transfer zone. During commissioning, the sequence should be tested first without product and then under a representative load.
Main Features
Stable transfer between adjacent machines
Speed selected for the line balance
Open access for cleaning
Replaceable wear parts
Guards around drives and pinch points
Layout options for new lines or retrofits
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P607 |
| Application | Which main used for lifting meat crate |
| Rated voltage/Phase/Frequency | 380V/3P/50HZ |
| Power | 0.37kw |
| Out size | 2500*520*750‑2100mm(L*W*H) |
| Component and material | 1) Stainless steel square tube frame (60*40*2mm and 38*25*2mm) 2) Polyoxymethylene module network belt 3) Stainless steel driving shafts and roller 4) Frequency control |
| Quotation control | Confirm load, usable width, length, speed, working height, drive position, line direction and controls. For overhead systems, add rail profile, trolley type and suspension spacing. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is pig slaughter lines, inspection areas, cutting rooms and other stations that need orderly product flow. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 60 pigs per hour places the meat crate lifting machine between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
